Technical Specifications

- PUNP and PUGNP wires for residential use corresponds with ТU 16.К80-06-89 (Company Standard);

- Maximum working temperature of wire is from -25ºС to + 40ºС;

- Maximum relative humidity at +35°С temperature is 98%;

- Electric resistance of the lead core at 20°С, converted to 1 km length corresponds with GOST 22483-77 (State standard);

- AC Testing voltage 1500 Volt works at frequency 50 Hz within 1 min applied into between lead cores;

- Determined period of no-failure operating work is not less than 5000 hours;

- Warranty life period of wires is three years since the delivery date;

- Factory length to be agreed with customer.

Wire Structure

- PUNP lead core wire is made from copper type MM corresponds to the 1st class of flexibility as per GOST 22483-77 (State Standard) and PUGNP corresponds to 3rd class of flexibility as per GOST 22483-77 (State Standard);

- Insulation of the lead cores is made from PVC incombustible elastron;

- Jacket is made from PVC incombustible elastron laid above parallel laid lead cores.

Applications

PUNP and PUGNP wires for residential use designed for laying for repair works and in the lighting networks, mounting and connecting low current devices to the AC networks with voltage up to 250 V and frequency 10 kHz and for other low current devices for residential use. PUNP wires proposed for fixed laying for lighting networks and PUGNP wires for temporary connections to lighting networks.

Order arrange table